REFRACTORY MIXING / GRM800
GRM800 800 kg Refractory Pan Mixer
Batch mixing of refractory materials and castables before installation.
- Mixing capacity
- 800 kg
- Motor power
- 22 kW
- Mixing speed
- 39 rpm
Batch & formulation requirements
The GRM800 is an 800 kg capacity refractory pan mixer with an elevated feeding arrangement. Vertical paddles force material through the mixing zone, and bolt-in steel liners protect the pan. The page describes use alongside a wet refractory spraying pump. Its listed platform, rails and ladder provide access to the charging area, while a high-pressure washer assists cleaning.
Refractory installation contractors and industrial lining material preparation; confirm suitability for the specific formulation.
Provide material bulk density, bag weight, batch requirement, water dosage, mixing sequence and desired discharge height. Confirm the recipe with the refractory supplier. Hourly output cannot be derived from batch mass without verified loading, mixing and discharge times.
The capacity is recorded in kilograms as published. Do not substitute liters or claim a guaranteed production rate. Agree on loading limits, mixing sequence and discharge timing for the actual material before ordering.
Designed around the material flow
- Bolt-in wear-resistant steel liners.
- Vertically oriented mixing paddles.
- Operator platform with rails and ladder.
- High-pressure washing device described.
- Forklift pockets for handling.
- Manual discharge; hydraulic discharge optional.
- Motor soft-start device listed.
The larger batch capacity supports preparation for downstream refractory placing equipment. The platform provides access to the elevated loading point, and forklift pockets give a defined handling interface. Cleaning equipment helps remove residue, subject to the material’s setting behavior.
Structure & installation
Installation planning: Confirm the loading method, electrical supply, water provision, discharge clearance and handling access.
Pending confirmation. A model-specific installation drawing, interface dimensions and electrical diagram have not been supplied. Request these for the offered configuration. Product photographs do not replace installation drawings.
Technical specifications
| Parameter | Value | Unit | Condition |
|---|---|---|---|
| Mixing capacity | 800 | kg | P1 product table |
| Mixing speed | 39 | rpm | P1 product table |
| Motor power | 22 | kW | P1 product table |
| Feeding height | 2500 | mm | P1 product table |
| Dimensions L × W × H | 2800 × 1880 × 2640 | mm | P1 product table |
| Weight | 1350 | kg | P1 product table |
Mass and machine dimensions are not packing or shipping measurements.
Data source: client-supplied GRM800 product document, technical table P1. Cited official product page. Published values are source-supported, not independently performance-tested.
Capacity & operating boundaries
Material and Production Planning
Operating details to obtain Request the electrical diagram, installation drawing, operating instructions, cleaning procedure and spare-parts list for the exact configuration. Confirm any water metering or automation functions separately.
Mixing capacity is specified in kilograms. Usable volume, cycle time and guaranteed hourly output are not established by this table. The refractory supplier’s recipe and the complete loading, mixing and discharge sequence must be agreed for the material.
Pending confirmation. A verified performance curve or material trial record is not available. Maximum values must not be assumed to occur simultaneously.
Loading, discharge & cleaning
Items requiring confirmation Confirm the standard discharge mechanism, washer specification, platform supply and lifting instructions. Voltage, mixing time, usable pan volume and maximum aggregate size are not specified in the technical table.
Pending confirmation. Confirm the standard accessory list, consumable parts and operating instructions for the exact build. Confirm cleaning procedure, discharge actuation and water metering separately.
Documentation & evidence
Pending confirmation. No model-specific independent test report or verified project case has been supplied for this representative page. Product certification applicability, document validity and public display permission remain to be checked. No certification or service-life guarantee is implied.
Quotation & support scope
Packaging, minimum order quantity and lead time: Not established in the cited technical data. Request the packing method, packed dimensions, gross weight, order quantity and delivery schedule in the quotation. Machine dimensions and weight are not shipping measurements.
Also confirm the standard accessory list, consumable parts, warranty, commissioning support, packing, MOQ and lead time. No certification, factory production capacity or quantified service-life claim is added without supporting records.
Discuss equipment selection, technical information and spare-parts requirements. View technical and spare-parts support.
Discuss the offered configuration
Share the refractory material, batch requirement, recipe, loading and discharge arrangements.
Request a technical quotation