DRY-MIX REFRACTORY GUNNING / GZ-5AR
GZ-5AR Pneumatic Dry Refractory Gunning Machine
Air-driven dry refractory application with adjustable material feed.
- Rated output
- 1–5 m³/h
- Drive type
- Air motor —
- Conveying hose ID
- 51 mm
How it works & where it is used
The GZ-5AR is a full-pneumatic straight-chamber rotor machine with a published output range of 1–5 m³/h. It uses a five-cylinder piston air motor and a 51 mm conveying hose. The source lists conveying-system air consumption and air-motor consumption separately, making air-supply confirmation an important part of selecting this model.
Refractory installation and repair contractors; steel furnace lining work.
Designed around the material flow
- Five-cylinder piston air motor.
- Air filter, pressure regulation and oil-mist preparation described.
- Dust collection bag and cleaning air gun.
- Pre-dampening nozzle, hose and selectable couplings.
- Heavy-duty solid wheels.
- A 6 bar water pump is described; confirm drive and inclusion.
Pneumatic drive offers an alternative where a suitable electrical feed-motor supply is unavailable. Air preparation supports the motor service requirements. A separate motor-air figure helps identify the compressor information that must be resolved before ordering.
Structure & installation
Installation planning: Confirm compressor delivery, hose routing, nozzle water supply and drive requirements. Conveying distances depend on the actual installation.
Pending confirmation. A model-specific installation drawing, interface dimensions and electrical diagram have not been supplied. Request these for the offered configuration. Product photographs do not replace installation drawings.
Technical specifications
| Parameter | Value | Unit | Condition |
|---|---|---|---|
| Rated output | 1–5 | m³/h | P1; material dependent |
| Maximum horizontal distance | 100 | m | P1; route dependent |
| Maximum aggregate size | 15 | mm | P1 product table |
| Conveying hose ID | 51 | mm | P1 product table |
| Operating air pressure | 0.2–0.4 | MPa | P1 product table |
| Published air consumption | 8–9 | m³/min | P1 product table |
| Air motor consumption | 7.5 | m³/min | P1 product table |
| Drive type | Air motor | — | P1 product table |
| Charging height | 1.2 | m | P1 product table |
| Rotor speed | 0–13.2 | rpm | P1 product table |
| Dimensions L × W × H | 1350 × 750 × 1300 | mm | P1 product table |
| Weight | 500 | kg | P1 product table |
Mass and machine dimensions are not packing or shipping measurements.
Data source: client-supplied GZ-5AR product document, technical table P1. Cited official product page. Published values are source-supported, not independently performance-tested.
Air, power & conveying boundaries
Air-pressure values describe the pneumatic system, not the pressure of a hydraulic pump. Do not assume maximum output and maximum conveying distance can be achieved simultaneously.
Information needed for selection Confirm the combined motor and conveying air requirement, available pressure, water-pump drive and hose layout. Ask for the recommended compressor specification in the quotation.
Pending confirmation. A verified performance curve or material trial record is not available. Maximum values must not be assumed to occur simultaneously.
Configuration & maintenance
Items requiring confirmation Do not size the compressor using only 8–9 m³/min. The page also lists 7.5 m³/min for the motor; request total simultaneous demand at the required pressure and clarify measurement conditions. Pneumatic drive is not hazardous-area certification.
Pending confirmation. Confirm the standard accessory list, consumable parts and operating instructions for the exact build. Confirm the hose diameter, hose length, nozzle and whether a water pump is included.
Documentation & evidence
Pending confirmation. No model-specific independent test report or verified project case has been supplied for this representative page. Product certification applicability, document validity and public display permission remain to be checked. No certification or service-life guarantee is implied.
Quotation & support scope
Packaging, minimum order quantity and lead time: Not established in the cited technical data. Request the packing method, packed dimensions, gross weight, order quantity and delivery schedule in the quotation. Machine dimensions and weight are not shipping measurements.
Also confirm the standard accessory list, consumable parts, warranty, commissioning support, packing, MOQ and lead time. No certification, factory production capacity or quantified service-life claim is added without supporting records.
Discuss equipment selection, technical information and spare-parts requirements. View technical and spare-parts support.
Discuss the offered configuration
Share the refractory material, required output, hose route, compressed-air capacity and available power.
Request a technical quotation