DRY-MIX REFRACTORY GUNNING / GZ-6AR/RD
GZ-6AR/RD Air Driven Refractory Gunning Machine
Pneumatic dry refractory gunning through a rotary feed bowl and conveying hose.
- Maximum output
- 6 m³/h
- Air motor power
- 5 hp
- Conveying hose ID
- 38 mm
How it works & where it is used
The GZ-6AR/RD uses a 5 hp air motor to drive its material feed bowl. Compressed air also carries dry refractory material through a 38 mm hose to the nozzle, where water is added. The machine has 16 feed-bowl pockets and a published maximum output of 6 m³/h. The product page states that the compressor is supplied separately.
Steel mills, cement plants, glass factories and industrial furnace installation projects.
Designed around the material flow
- Direct-drive 5 hp air motor.
- Continuous-feed hopper with bag breaker.
- Double-blade material agitator.
- Pressure gauges for operating observation.
- Rubber plates designed for replacement.
- Pre-dampening nozzle assembly described on the product page.
The pneumatic feed drive provides an alternative to an electric feed motor. Its listed weight of 230 kg supports transport planning, although lifting and handling arrangements must be checked. Serviceable rubber plates facilitate wear-part replacement without implying a fixed maintenance interval.
Structure & installation
Installation planning: Confirm compressor delivery, hose routing, nozzle water supply and drive requirements. Conveying distances depend on the actual installation.
Pending confirmation. A model-specific installation drawing, interface dimensions and electrical diagram have not been supplied. Request these for the offered configuration. Product photographs do not replace installation drawings.
Technical specifications
| Parameter | Value | Unit | Condition |
|---|---|---|---|
| Maximum output | 6 | m³/h | P1; material dependent |
| Maximum aggregate size | 10 | mm | P1 product table |
| Feed bowl pockets | 16 | count | P1 product table |
| Conveying hose ID | 38 | mm | P1 product table |
| Air motor power | 5 | hp | P1 product table |
| Published air consumption | 9–11 | m³/min | P1 product table |
| Dimensions L × W × H | 1100 × 790 × 920 | mm | P1 product table |
| Weight | 230 | kg | P1 product table |
Mass and machine dimensions are not packing or shipping measurements.
Data source: client-supplied GZ-6AR/RD product document, technical table P1. Cited official product page. Published values are source-supported, not independently performance-tested.
Air, power & conveying boundaries
Air-pressure values describe the pneumatic system, not the pressure of a hydraulic pump. Do not assume maximum output and maximum conveying distance can be achieved simultaneously.
Information needed for selection Confirm continuous air delivery at the required pressure, the air preparation arrangement and hose length. Do not infer hazardous-area certification from pneumatic drive.
Pending confirmation. A verified performance curve or material trial record is not available. Maximum values must not be assumed to occur simultaneously.
Configuration & maintenance
Items requiring confirmation The page does not separate motor air from conveying air in the 9–11 m³/min figure. Confirm its basis and the required pressure before compressor selection. Conveying distance and hopper volume are not stated in the table.
Pending confirmation. Confirm the standard accessory list, consumable parts and operating instructions for the exact build. Confirm the hose diameter, hose length, nozzle and whether a water pump is included.
Documentation & evidence
Pending confirmation. No model-specific independent test report or verified project case has been supplied for this representative page. Product certification applicability, document validity and public display permission remain to be checked. No certification or service-life guarantee is implied.
Quotation & support scope
Packaging, minimum order quantity and lead time: Not established in the cited technical data. Request the packing method, packed dimensions, gross weight, order quantity and delivery schedule in the quotation. Machine dimensions and weight are not shipping measurements.
Also confirm the standard accessory list, consumable parts, warranty, commissioning support, packing, MOQ and lead time. No certification, factory production capacity or quantified service-life claim is added without supporting records.
Discuss equipment selection, technical information and spare-parts requirements. View technical and spare-parts support.
Discuss the offered configuration
Share the refractory material, required output, hose route, compressed-air capacity and available power.
Request a technical quotation