DRY-MIX REFRACTORY GUNNING / GZ-6DR/RD
GZ-6DR/RD Diesel Driven Refractory Gunite Machine
Dry refractory conveying and spraying using a diesel-driven material feed bowl.
- Maximum output
- 6 m³/h
- Diesel engine power
- 8.2 kW
- Conveying hose ID
- 38 mm
How it works & where it is used
The GZ-6DR/RD uses an 8.2 kW diesel engine to rotate a 16-pocket material feed bowl. Dry material enters an 80 L continuous-feed hopper, passes through the feed bowl and is carried by compressed air through a 38 mm hose. Water is introduced at the nozzle. The published maximum output is 6 m³/h; an external air compressor is still required.
Refractory installation and repair sites where a diesel feed drive is preferred.
Designed around the material flow
- Air-cooled diesel engine with a 6 L fuel tank.
- Continuous-feed hopper and bag breaker.
- Double-blade material agitator.
- Pressure gauges for observing operating pressure.
- Replaceable rubber sealing plates.
- Compact arrangement with aluminum nozzle connectors described.
The diesel feed drive can suit locations without a suitable electrical supply for the feed motor. Replaceable sealing plates provide a serviceable wear interface, and the hopper agitator supports material entry. Diesel drive does not eliminate the need for a separate compressor or nozzle water supply.
Structure & installation
Installation planning: Confirm compressor delivery, hose routing, nozzle water supply and drive requirements. Conveying distances depend on the actual installation.
Pending confirmation. A model-specific installation drawing, interface dimensions and electrical diagram have not been supplied. Request these for the offered configuration. Product photographs do not replace installation drawings.
Technical specifications
| Parameter | Value | Unit | Condition |
|---|---|---|---|
| Maximum output | 6 | m³/h | P1; material dependent |
| Hopper capacity | 80 | L | P1 product table |
| Maximum aggregate size | 10 | mm | P1 product table |
| Feed bowl pockets | 16 | count | P1 product table |
| Conveying hose ID | 38 | mm | P1 product table |
| Diesel engine power | 8.2 | kW | P1 product table |
| Cooling system | Air cooled | — | P1 product table |
| Diesel tank capacity | 6 | L | P1 product table |
| Dimensions L × W × H | 1600 × 800 × 980 | mm | P1 product table |
| Weight | 420 | kg | P1 product table |
Mass and machine dimensions are not packing or shipping measurements.
Data source: client-supplied GZ-6DR/RD product document, technical table P1. Cited official product page. Published values are source-supported, not independently performance-tested.
Air, power & conveying boundaries
Air-pressure values describe the pneumatic system, not the pressure of a hydraulic pump. Do not assume maximum output and maximum conveying distance can be achieved simultaneously.
Information needed for selection Provide site elevation, ambient conditions, fuel requirements and the planned hose layout. Request compressor sizing and engine service information together with the machine quotation.
Pending confirmation. A verified performance curve or material trial record is not available. Maximum values must not be assumed to occur simultaneously.
Configuration & maintenance
Items requiring confirmation The source identifies output as maximum theoretical performance. Engine brand, compressor consumption, working air pressure and conveying distance are not specified in the technical table; obtain these for the offered configuration.
Pending confirmation. Confirm the standard accessory list, consumable parts and operating instructions for the exact build. Confirm the hose diameter, hose length, nozzle and whether a water pump is included.
Documentation & evidence
Pending confirmation. No model-specific independent test report or verified project case has been supplied for this representative page. Product certification applicability, document validity and public display permission remain to be checked. No certification or service-life guarantee is implied.
Quotation & support scope
Packaging, minimum order quantity and lead time: Not established in the cited technical data. Request the packing method, packed dimensions, gross weight, order quantity and delivery schedule in the quotation. Machine dimensions and weight are not shipping measurements.
Also confirm the standard accessory list, consumable parts, warranty, commissioning support, packing, MOQ and lead time. No certification, factory production capacity or quantified service-life claim is added without supporting records.
Discuss equipment selection, technical information and spare-parts requirements. View technical and spare-parts support.
Discuss the offered configuration
Share the refractory material, required output, hose route, compressed-air capacity and available power.
Request a technical quotation